Hidrodos
PROCESS SOLUTIONS
0%
SKIP INTRO →
Disinfection & chemical dosing systems since 2010
Since 2010 · We bring the world’s leading manufacturers together under one roof.

Precise dosing and
total control
for water safety.

From disinfection and dosing systems to online monitoring — we design, install, commission, and operate, providing support throughout the entire lifecycle of the facility.

0Turnkey projects
0Countries
0Products
0Years of experience
MEMDOS SMART LB
MINICHLORGEN T Skid
Statiflo 200 Serisi Statik Mikser
±1%Dosing accuracy
200 kg/hGas chlorine capacity
Scroll
Brands we represent as authorised distributor
Lutz-Jesco Statiflo Griffco
Solution Families

One partner for every step of the process

Each product family stands on its own, yet for us, they are links in a single chain. The selection of a dosing pump, the sizing of a static mixer, and the determination of a measurement point are all calculated in tandem—because the safety of water does not depend on a single piece of equipment; rather, the entire system is only as strong as its weakest link.

FAMILY 01

Gas Chlorination Systems

Vacuum regulators · Chlorinators · Injectors · Safety equipment

A complete equipment family that carries chlorine gas from cylinder to injection point entirely under vacuum. Vacuum regulators, chlorinators, changeover units, injectors and safety systems work together in accordance…

25 g – 200 kgchlorine dosing range per hour
FAMILY 02

Dosing Pumps & Skids

Solenoid · Stepper motor · Motor-driven · Piston · Peristaltic

Five drive technologies for the accurate dosing of acids, alkalis, coagulants, flocculants and disinfectants. Accessories in the same family — injection nozzles, back pressure valves, pulsation dampeners, flow monitors…

0,36 – 4000litres/hour capacity range
FAMILY 03

Chemical Centrifugal Pumps

Mechanical seal · Magnetic coupling · Vertical immersion

Chemically resistant centrifugal pumps for transferring acids, alkalis and solvents. Magnetically coupled models have no shaft seal, eliminating leakage risk, and models to DIN/EN 22858 fit directly into existing…

42metres head, up to
FAMILY 04

Disinfection Systems

Chlorine dioxide · Sodium hypochlorite · Calcium hypochlorite · Electrolysis

Systems that generate the disinfectant on site: sodium hypochlorite from salt, chlorine dioxide from precursor chemicals and calcium hypochlorite solution from granulate. Transport and storage of hazardous chemicals are…

0-60kg/hour active chlorine output
FAMILY 05

Measurement & Control Instruments

TOPAX controllers · Sampling stations · Sensors · Gas warning

Continuous measurement of chlorine, pH, Redox, chlorine dioxide, conductivity and turbidity, with the dosing equipment controlled accordingly. Modular TOPAX controllers, EASYPRO sampling stations and gas warning devices…

4channels measured simultaneously
FAMILY 06

System & Process Technology

Dosing panels · Container systems · Polymer preparation

Ready-built dosing units in which pump, fittings, tank and control are assembled and tested in the factory. On site only water, chemical and power connections are made, reducing commissioning time and the risk of…

10.000litres/hour polymer preparation
FAMILY 07

Static Mixers

Pipe mixers · Channel mixers · Gas dispersion systems

Motionless mixers that blend the dosed chemical with the fluid quickly and homogeneously. With no moving parts, tanks or external power there is no operating cost, and channel mixers work in gravity flow with only a few…

0moving parts — maintenance free
FAMILY 08

Metering Pump Accessories

Back Pressure and Pressure Relief Valves, Calibration Columns, Pulsation Dampeners/Inlet Stabilizers/Surge Suppressors, Injection Valves/Quills, Corporation Stops, Gauge & Instrument Guards, Fusion Dampeners, Y-Strainers

A comprehensive line of fluid handling accessories for applications in municipal and industrial water and wastewater treatment, power generation, chemical, petrochemical, and pharmaceutical processing, oil and gas and…

How It Works

The journey of water — and where we step in

SOURCE · DAM / WELL TRANSFER PUMP CHEMICAL TANK DOSING PUMP STATIC MIXER pH · ORP · Cl MEASURE & CONTROL 4–20 mA FEEDBACK NETWORK · SAFE WATER
Scroll — the line draws itself
Product Showcase

Our products

Browse our full range by category — from dosing pumps to gas chlorination systems.

C 2526 Chlorinator C 2526 ChlorinatorDIN 19606 vacuum chlorinator — 5/10/15/25 kg/h MEMDOS SMART LB MEMDOS SMART LBStepper motor-driven diaphragm dosing pump MINICHLORGEN T Skid MINICHLORGEN T SkidMINICHLORGEN T Skid — skid-mounted sodium hypochlorite system Statiflo 200 Serisi Statik Mikser Statiflo 200 Serisi Statik MikserStatiflo Series 200 sanitary stainless steel mixer ChlorStop Acil Tüp Kapatma Vanası ChlorStop Acil Tüp Kapatma VanasıPressure safety shutoff valve for immediate chlorine cut-off C 7522 Vakum Tip Hat Değiştirme Sistemi C 7522 Vakum Tip Hat Değiştirme SistemiElectrical vacuum chlorine changeover valve — 100 kg/h Booster Pompalar Booster PompalarBooster pump for ejector motive water — 22.5 m³/h C 2213 Vacuum Regulator C 2213 Vacuum RegulatorChlorine gas vacuum regulator — up to 10 kg/h Klor Yardımcı Vanaları (Needle Valve) Klor Yardımcı Vanaları (Needle Valve)Chlorine auxiliary valves for cylinders and drums PVC Klor Kollektörü ve Dağıtım Hattı PVC Klor Kollektörü ve Dağıtım HattıPVC chlorine manifold and distribution line for vacuum service Enjektörler EnjektörlerStandard ejectors for chlorine gas — up to 60 kg/h CVS Mekanik Hat Değiştirme Sistemi CVS Mekanik Hat Değiştirme SistemiVacuum changeover switch without auxiliary power — 10 kg/h Klor Akış Gözetleme Camı Klor Akış Gözetleme CamıFlow sight glass with borosilicate windows C 2214 Vakum Regulator C 2214 Vakum RegulatorChlorine gas vacuum regulator — up to 4 kg/h Klor Tüp ve Tank Tartıları Klor Tüp ve Tank TartılarıElectronic drum and cylinder scales with digital display — 0…2000 kg CHLORWACHE Acil Tank Kapatma Sistemi CHLORWACHE Acil Tank Kapatma SistemiCHLORWACHE pneumatic valve closing system C 2525-V Vakum Regulator C 2525-V Vakum RegulatorChlorine gas vacuum regulator — up to 25 kg/h Klor Küresel Vanaları Klor Küresel VanalarıChlorine ball valve for shut-off duty — DN8–DN25 Basınçlı Su Hattı Seti Basınçlı Su Hattı SetiMotive water set — constant supply pressure for ejectors C 2216-V/VF Vakum Regulator C 2216-V/VF Vakum RegulatorCompact vacuum regulator with yoke connection — 10 kg/h C 2217-V/VF Vakum Regulator C 2217-V/VF Vakum RegulatorCompact vacuum regulator with union nut — 10 kg/h Enjektör Çek Vanası / Vakum Kırıcı Enjektör Çek Vanası / Vakum KırıcıEjector non-return valve / vacuum breaker C 7523 Vakum Tip Hat Değiştirme Sistemi C 7523 Vakum Tip Hat Değiştirme SistemiVacuum chlorine changeover valve — 4…80 kg/h Sıvı Klor Tutucu (Catchpot) Sıvı Klor Tutucu (Catchpot)Catchpot for separating liquid chlorine and dirt
View all products
——
——
Technical Catalogue

Every product, with its numbers

Hover a row on the left — the callout lines draw themselves onto the product.

—

—

—

Global Reach
—
Head office
International project
Drag to rotate
Adıyaman Central Drinking Water ProjectAdıyaman · Gas Chlorination System 2026
Malatya Gündüzbey Gas Chlorination and Scrubber SystemMalatya · Gas Chlorination — 20 kg/h 2026
Yangiyer, UzbekistanYangiyer · Gas Chlorination System 2025
Emet Drinking Water Treatment PlantKutahya · Gas Chlorination System 2024
Tüpraş Kırıkkale RefineryKırıkkale · CO₂ Dosing System, 5 kg/h 2023
Edirne Erikli Drinking Water Treatment PlantEdirne · Disinfection System 2021
Artvin Hopa Wastewater Treatment PlantArtvin · Gas Chlorination System 2021
Artvin Yusufeli Wastewater Treatment PlantArtvin · Gas Chlorination System 2021
Kazan, TatarstanKazan · Salt-to-Chlorine Generator 2019
Yeşilvadi Water UnionIstanbul · Gas Chlorination Refurbishment 2018
Khartoum Water Treatment Plant, SudanKhartoum · Gas Chlorination System 2018
Al-Jubail WTP, Saudi ArabiaAl Jubail · Scrubber System — 6,000 m³/h 2017
2011 → 2026 · turnkey projects Scroll
TÜRKİYE — SITE DISTRIBUTION
Head office — Izmir
Reference project
Neighbouring countries
How we work

One partner from design to service

From understanding your needs to commissioning and years of technical support, the same engineering team is with you at every step.

  1. 01

    Application-Specific Design

    Sizing calculations, equipment selection and system design for your process.

  2. 02

    Engineering & Project Design

    P&ID, layout, hydraulic calculation and technical specification support.

  3. 03

    Manufacturing & Skid Build

    Complete dosing skids with control panels, pipework and factory testing.

  4. 04

    Installation & Commissioning

    Supervision or turnkey installation and on-site commissioning.

  5. 05

    Technical Service

    Lutz-Jesco authorised service centre with genuine spare parts.

  6. 06

    Process Training

    Hands-on process training for operators and maintenance teams.

Selected Projects

References

Fields of Work

The sectors we serve

From drinking water to petrochemicals — every process has its own chemistry, materials and risks.

Representations

The Türkiye address of global brands

As an authorised distributor and technical service centre: genuine products, genuine spare parts and factory support.

2013

Lutz-Jesco

Authorised distributor & technical service centre for Türkiye

Germany
2015

Statiflo

Static Mixers — representative for Türkiye

United Kingdom
2025

Griffco

Valves & accessories — representative for Türkiye

USA
Request a Quote

Tell us your process,
we will size the system.

Three short steps. Enter your flow and target dose and we calculate the required dosing capacity for you — a technical proposal follows within 48 hours.

1Request
2Process
3Contact
What can we help you with?
Choose the type of request; the following questions adapt to it.
If you arrived from a product page this is filled in automatically.
Process data
Fill in what you know — we can complete the rest together.
Required dosing capacity
0l/hour
— Suggested pump range
How can we reach you?
We reply with a technical proposal within 48 hours.
Please enter your name.
Please enter your company name.
Please enter a valid e-mail address.
Please enter a phone number of at least 10 digits.
1 / 3

Your request has been received

Our engineering team will review your process data and get back to you with a technical proposal within 48 hours.

Reference —
Send by E-mail