Chlorine Gas Under Vacuum
Vakum Hattı Boru ve Bağlantı Elemanları
PVC piping and fittings for chlorine vacuum lines
The piping and fittings used in chlorine gas vacuum lines are made of chlorine-resistant PVC and PE materials. Correct sizing and leak-tight assembly of the vacuum line are decisive for the safety of the chlorination system: a leak in the line causes the vacuum to drop and the vacuum regulator to close.
Depending on capacity, PE hose (Ø8/12, Ø12/16) or PVC pipe (Ø16 – Ø40) is used; hose clamp connections, glue-in sockets, tees and blank caps complete the line. Vacuum line components must not be used for pressurised chlorine gas.
Key features
- Chlorine-resistant PVC and PE materials
- PE hose in Ø8/12 and Ø12/16
- PVC pipe from Ø16 to Ø40
- Hose clamp connections and glue-in sockets
- Correct diameter selection for a stable vacuum
Technical data
Technical specifications
| Materials | PVC, PE |
|---|---|
| Hose sizes | Ø8/12, Ø12/16 |
| Pipe sizes | Ø16 – Ø40 |
| Service | Vacuum service only |
Documents
Technical documents
Chlorine Gas Under Vacuum
Other products in this category
C 7522 Vakum Tip Hat Değiştirme SistemiElectrical vacuum chlorine changeover valve — 100 kg/h
PVC Klor Kollektörü ve Dağıtım HattıPVC chlorine manifold and distribution line for vacuum service
CVS Mekanik Hat Değiştirme SistemiVacuum changeover switch without auxiliary power — 10 kg/h
C 7523 Vakum Tip Hat Değiştirme SistemiVacuum chlorine changeover valve — 4…80 kg/h
Gaz Klor DebimetresiFloat-type flow meter for chlorine gas — 0.025…10 kg/h
Transmitterli Gaz Klor DebimetresiChlorine gas flow meter with transmitter output